Carbon offsetting means to offset those greenhouse gases that are caused by our actions. The purpose of this paper is to examine how companies are working with Carbon offsetting. The focus of the research is how travel agencies and companies that provides Carbon offsetting. The writers also highlight the problems Carbon offsetting is facing. The study was performed with qualitative methods through interviews with three companies working with Carbon offsetting.

Detecting small signals with a comparator demands that the total voltage offset is lower than the actual signal. The total offset includes the voltage offset in the comparator and the voltage offset that is created by the offset currents that flows thru the load at the comparators input. The goal with this comparator that has been developed has been that it will have a total voltage offset at maximum 500 uV. The comparator does not need to be extremely fast or does not need to operate in a big frequency area. To have all the flexibility that is needed a full custom technique is used.

Sammanfattning Titel: Varför förekommer offset inom försvarsindustrin?Studie om kompensationshandel utifrån nationalekonomiskateorierDatum för seminarium: 8 juni, 2007Ämne/Kur's: Nationalekonomi, kandidatuppsat's 10pFörfattare: Linnéa MörkHandledare: Jerker HolmSyfte: Syftet har varit att undersöka varför offset förekommer inomförsvarsindustrin och förklara fenomenet utifrånnationalekonomiska teorier.Metod: Jag har använt mig av en kvalitativ analysmetod. Jag hargenomfört intervjuer på Saab AB och ISP (Inspektionen förstrategiska produkter) för att på det sättet finna aktuell fakta omhur företag arbetar med offset idag.Slutsat's: Det är främst fem nationalekonomiska teorier som påverkarförekomsten av offset. Den välvilliga staten, Public Choiceteorier, Fångarna's dilemma och teorier kring hold up problemetoch ofullständiga kontrakt. Dessa olika teorier förklarar varföroffset idag är vanligt förekommande inom försvarsindustrin ochvilka incitament som ligger bakom valet av handelsform..

The aim for this thesis was to develop a proposal of documentation, containing rules and procedures, which JernströmOffset needs to acquire the Certified Graphic Production certification. A fundamental part was to study the materialissued by Sveriges Grafiska Mediaförening, to clarify the requirements that must be met to obtain the certification. Therecommendations found in the CGP material must also be considered.Based on the requirements and recommendations of Certified Graphic Production, a mapping of the workflows atJernström Offset was performed. It was done by interviewing employees from different departments at the company,this to get a clear understanding of the operations carried out throughout the production flow and the final qualityfollow-up.During our reviewing process we found that a number of changes, in terms of working environment and practices,must be made at the company. As a result of this we propose some appropriate actions to be implemented.The documentation was finally written, through the requirements and recommendations of Certified GraphicProduction and then applied to Jernström Offset?s work procedures..

The idea for this project was initiated together with one of the leaders in the forest, paper and packaging industry. To get through an A/R CDM process the company is exposed to the risk of failing the process or that the overall costs will exceed the benefits of the project. This would delete the incentives to invest in GHG removals compared to purchasing emission allowances on the carbon market. The questions that have been raised and needs clarification in the thesis are the following:? From a company perspective, what are the incentives for implementing Forest Clean Development Mechanism (CDM) projects?? What is a likely financial outcome of a reforestation CDM project on degraded land in the Guangxi province of the Peoples Republic of China?? When does an investment like this break even with the cost of buying market based carbon emission allowances? The objective of this master thesis is to carry out a research about the incentives for forest, paper and packaging companies to invest in reforestation through the clean development mechanism.

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

Freshwater ecosystems have long been neglected as an important part of the global carbon cycle. However, research shows that most of the world?s lakes are net-heterotrophic and consequently emitters of greenhouse gases to the atmosphere. In many boreal and north-temperate lakes, most of the yearly emissions usually occur in spring, shortly after ice-thaw. The aim of this study was to quantify the flux of carbon dioxide (CO2) and methane (CH4) in three boreal lakes, during this annual event.

PAPRO operates within the Forest Research company and their mission is to develop value-addingindustry solutions. At present there are no good ways for mills to easily test the printing quality on newsprintpaper. There is a great need for a fast way to do this on different paper qualities; with a laboratory-offset press this can be both a time and money saving method. At PAPRO Forest Research, NewZealand, a laboratory offset press has been developed and designed, during the past seven years, concerningthis issue. Earlier projects were made concerning the press, e.g.

The aim of this thesis is to create an understanding of the incentives for forest companies to invest in reducing carbon dioxide emissions from deforestation and forest degradation, which is termed REDD. The Brazilian Amazonas was chosen as the base for the investment case. Brazil has the largest area of rainforest in the world, and also the biggest problem with deforestation. The Amazon region of Brazil comprises rainforest which is largely intact and unexploited. Accordingly, there is significant potential scope for prospective investments in a REDD-project, and so have a noteworthy impact in preventing deforestation.The research approach used the United Nation?s Clean Development Mechanism concept was used as a framework for ascertaining the investment costs in potential REDD-projects.

Sapa Heat Transfer is a company that produces aluminum heat-exchanger strips for the automotive industry. Sapa Heat Transfer wish to chart their emissions of carbon dioxide in order to meet future demands on carbon dioxide reporting. They also would like to examine the meaning of the term ?green electricity? which is marketed as carbon dioxide free, and the sort of electricity that they purchase. This report includes both direct (liquefied petroleum gas and diesel) and indirect (water, process-water, long distance heating, waste) emissions from their company.

The goal with this examination thesis is to investigate the difference in carbon dioxide emissions between a building with a wooden versus concrete carcassing from a life cycle perspective. The huge amounts of carbon dioxide released into air from human activities must be reduced to prevent serious consequences. A way to limit this issue is through performing a comparative study where the result shows which of two products with the same function has the lowest emission of carbon dioxide, whereof the product with the lowest carbon dioxide pollution can be chosen.To be able to perform a study like this an object has been chosen and studies about life cycle analyses have been done. The rental square meter, the thermal conductivity value, the energy requirements and the placement of the building has been set equal in both framework types. There were solely dissimilarities of the two buildings taken into account when this comparison study was performed.The result of the study is that a building constructed with a wooden carcassing has the lowest amount of carbon dioxide emissions.

Total organic carbon (TOC) and chemical oxygen demand (COD) are two methods used for measuring organic pollutants in wastewater. Both methods are widely used but the COD method results in production of hazardous wastes, including mercury.The purpose of this study was to validate the method TOC that will replace COD and find a factor to convert TOC to COD. In this study 26 samples were analyzed from four sewage treatment plant in the municipality of Enköping.The results show that the COD method could be replaced by the TOC method.The factor for COD/TOC was between 3.1 - 3.3. Both methods will be used in parallel until 2013 when it will be forbidden to use the COD analysis..

Today, about 15 to 20 percent of Sweden?s total emission of carbon dioxide can be traced to the household sector. By examining apartment blocks in a life cycle perspective, the origin of the carbon dioxide emission has been charted and analyzed. This information has been used to create a computational model that calculates the total emission of carbon dioxide from a specific apartment block. The results from the analyzed apartment blocks indicate that both the use of energy and the emission of carbon dioxide have been reduced since the 1960s. Through the examination of building materials, it is possible to lower the emission of carbon dioxide that origins from the construction phase of an apartment block.

Energy Director is a control and measuring system for energy consumption and is part of the product portfolio of E.ON AG for more efficient use of energy, offered to business customers. As of today, the system has only one parameter of control, namely power, and the objective of this essay has been to investigate whether other ones could be added. The emphasis is on the environmental perspective, which is why carbon dioxide has served as an example for this parameter in question.Parallel with the study of Energy Director electricity on the margin, calculations of carbon dioxide equivalents and also the Swedish trade of electricity have all been highlighted. Results indicate that when reductions in energy are made it is endorsed to omit from electricity on the margin rather than some mean distributed electricity, under certain conditions, and in addition the calculations of the reductions should be modified regarding the efficiency of the power stations fuelled by lignite and bituminous coal. Sweden practices trade with the Nordic countries as well as Poland and Germany.

According to the theory of environmental Kuznets curve there is a relationship between carbon emissions and GDP. The relationship has an inverted U-shape. Carbon emissions rise initially and then decreases once a certain level of GDP is obtained.This essay interprets earlier studies in the field of environmental economics and uses public choice to seek answer on how the population acts on aggregate level. This essay analyses 115 countries in cross-sectional data. The analysis shows that there is a significant relationship between carbon dioxide emissions and GDP that is increasing at first and then decreases for a certain level of GDP.